## Link to GitHub Issue or related Pull Request, if one exists
Fixes#840
## Description of change
Currently, for subscreen games, mouse events are still delivered even
when the subscreen overlay window is not visible.
Change this so that the subscreen overlay must be active and under the
mouse cursor for the mouse-to-touch transformation to occur. Applies to
both native and wintouchemu.
## Testing
Needs to test everything again..
iidx:
- [ ] full screen with overlay
- [ ] single window with overlay
- [ ] two window
Test: mouse, poke, api, real touch screen
sdvx:
- [ ] full screen with overlay
- [ ] windowed
popn
- [x] full screen with overlay
- [x] window with overlay
- [x] dedicated window
gitadora
- [x] single window with overlay
- [x] dedicated sub window
nostalgia
- [x] fullscreen
- [x] windowed
test: poke
wintouchemu
- [ ] Do all of the above again with wintouchemu
## Link to GitHub Issue or related Pull Request, if one exists
#201
## Description of change
- Adds MJPEG camera support using Media Foundation decoding.
- Moves camera capture to asynchronous Source Reader callbacks.
- Supports native NV12 and YUY2 capture, preferring target-sized native
formats over MJPEG when possible.
- Improves capture and rendering performance through callback-paced
reads, bulk frame uploads, optimized row-based flips, and lazy
allocation of flip textures.
- Makes runtime media-type changes interrupt pending reads and safely
flush and reconfigure the Source Reader.
- Improves automatic mode selection based on aspect ratio, proximity to
1280x720, frame rate, and capture format.
- Hardens camera shutdown, flush handling, media-type changes, and
repeated capture failures.
## Testing
Tested with two cameras in tdj
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Touch piano mode. Allows piano keys to be played with the touch screen.
Since the touch screen is still needed for menu navigation (including
during songs) a toggle switch is added so that the user can flip between
navigation mode and piano mode.
The touch targets are pixel-perfect. Don't let the game's piano
animations fool you.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Another bug reported by a sea creature
## Description of change
Fix keyboard navigation in Controllers sub tabs.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Reported by a certain sea reptile
## Description of change
Fix the + / - buttons for number patches not working. Regressed by one
of the ImGui version updates.
## Testing
seems fine now
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#635
## Description of change
Adds optional **button modifiers**, allowing a binding to require one or
more "modifier" buttons to be held before it activates.
- New "Modifiers" controller page in the overlay config to bind the
Modifier 1–4 source buttons.
- Each binding gains a 4-bit modifier_mask (Modifier 1-4). It is
persisted as an optional modifiers XML attribute on button nodes and
controller-preset entries. The attribute is optional and defaults to 0,
so existing config files and presets load unchanged and the feature is
off unless the user opts in.
- The button Edit properties popup gains a "Modifiers" dropdown to pick
which modifiers a binding requires. Doesn't apply to MIDI though.
- Input evaluation skips a binding whose required modifiers are not
held, falling through to its alternatives; velocity reporting uses the
same gated path.
- Controller-preset templates gain a "Modifiers" group for importing and
exporting.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Part 1 of many fixes for #814.
## Description of change
For the native touch hook - add code to inject synthetic touches using
Windows API (`InjectTouchInput`).
Note that this is Windows 8+ only, but we can make an assumption that we
are running on Win10+ for these games (TDJ/UFC/High Cheers) since the
cabs assume Win10.
Detect mouse events and allow IIDX poke to call into this to inject
synthetic touches.
Also, update the nativetouchhook to independently calculate window size
and rotation, instead of relying on rawinput layer.
## Testing
Tested to work with native touch option on IIDX, SDVX, POPN, all full
screen / windowed / sub on/off combinations.
Edge cases:
* sdvx main monitor rotated 270 deg
* touch invert option
* windowed mode resize / moved
All seem to work.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#245
## Description of change
Introduce patch groups. JSON schema now allows for a `"type": "group"`:
```json
{
"type": "group",
"gameCode": "LDJ",
"id": "timer-freeze",
"name": "Timer Freeze Patches",
"description": "Freezes various timers in the game."
},
{
"name": "Standard/Menu Timer Freeze",
"description": "Freezes all non-premium area timers.",
"caution": "",
"gameCode": "LDJ",
"type": "memory",
"group": "timer-freeze",
"patches": [
{
"offset": 9962743,
"dllName": "bm2dx.dll",
"dataDisabled": "0F84",
"dataEnabled": "90E9"
}
]
},
{
"name": "Premium Free Timer Freeze",
"description": "Freezes all premium area timers.",
"caution": "",
"gameCode": "LDJ",
"type": "memory",
"group": "timer-freeze",
"patches": [
{
"offset": 9111965,
"dllName": "bm2dx.dll",
"dataDisabled": "7E",
"dataEnabled": "EB"
}
]
},
```
In the UI, these will show up as tree nodes. The parent is not actually
treated as a patch; e.g., its state is not saved to the patch manager
config file; only the child patches states are managed, the parent's
state only bubble up only in the UI.
In downlevel versions of spice, group parents will show up as a patch of
invalid type. Child patches will still show up as individual patches.
## Testing
*how was the code tested?*
## Link to GitHub Issue or related Pull Request, if one exists
#345
## Description of change
If IIDX/SDVX/POPN "native touch" option is enabled, show an error
message if user toggles subscreen window.
Those options are meant for users with touch screens, and disables mouse
interactions. Users who like to randomly turn on options often latch on
to this option and get confused when clicks don't register.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Regressed by #793
## Description of change
Due to lock inversion, when binding an analog axis as a button, spice
deadlocks. Fix that.
Also create a separate `unordered_map` that keeps track of device
handles so that `WM_INPUT` handle can look up devices without having to
acquire the larger `devices_mutex` which could be held by (potentially)
lengthy operations like hotplug.
Fix more synchronization issues around hotplug. Latent bug exposed by
MIDI 2.0 issues.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Refactor patch manager.
This one file had the UI logic, config save/load, parsing patches JSON,
applying memory patches, everything all in one cpp file. Refactor and
separate out the layers.
## Testing
Sanity checked patch workflows.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#800
## Description of change
Restores keyboard navigation by default in spicecfg, and add an option
to optionally enable it in the overlay.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Similar to #797, draw an overlay to debug touch issues for reflec beat.
For rb, we draw on the ImGui surface. Draw horizontal and vertical line
for triggered sensors, and also a bounding box if scaling is in use.
Make small tweaks to how scaling works.
## Testing
Verified volzza 2 / reflesia / 1st game (landscape KBR)
## Link to GitHub Issue or related Pull Request, if one exists
regressed by #766, fixes#775
## Description of change
Some games like DDR leave `ShowCursor` ref count at non-negative number,
so when spice handles `WM_SETCURSOR` to change the cursor shape, it ends
up showing the OS cursor.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds an overlay window widget for controlling OBS over WebSocket.
Add new lines to the FPS widget that shows recording / streaming timers.
Show notifications for major state changes (stream started/stopped,
recording started/paused/resumed/stopped)
## Testing
After #739 there was a regression where the cursor visibility became
inconsistent if the FPS display was shown and then another overlay
window was toggled. Fix the imgui cursor toggle logic to only check for
the overlay layer visibility.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Fully flush `tmp` file and then use `MoveFileExW` instead of `CopyFileW`
which guarantees atomic operation on NTFS.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#251
## Description of change
CCJ registers for rawinput mouse. We allowed the rawinput registration
to go through to the OS, which prevents spice's rawinput stack from
using the mouse. This caused the overlay to not accept mouse input. Fix
it by not letting the rawinput registration through. Luckily, mouse
input continues to work properly in CCJ (for touch).
Also, fix a bug in DX11 overlay when toggling the main menu.
## Testing
Enable left nav for Card tab, splitting the single page into multiple
sub tabs.
Card Manager is now embedded in this UI (but can still be launched as a
separate window)
## Link to GitHub Issue or related Pull Request, if one exists
#747
## Description of change
The old approach called ImGui’s `SetScrollHereY()` while the options
list was still being laid out. That caused one-frame scroll corrections
and edge-snap jitter near scroll boundaries.
The new approach in `build_options_tab()`:
1. **On click** - set a flag (`options_scroll_pending` for categories,
`options_scroll_top` for group headers).
2. **During layout** - when building the target category, record its
content position with `GetCursorPosY()` (don’t scroll yet).
3. **After all options are built** - apply scroll once by setting
`window->Scroll.y` directly, and only if the position actually needs to
change (0.5px threshold).
That deferred, single-pass scroll avoids the shake while still
supporting scroll-up, scroll-down, and re-click-to-recenter.
## Testing
In spicecfg.exe and in-game overlay, Options tab:
Open groups with many categories
Scroll content down manually, then click a higher category in the left
nav - content scrolls up to that section
Re-click the same category after manual scroll - jumps back without
shake
Rapid re-clicks when already aligned - no jitter
Switch group headers - still scrolls to top; re-click at top - no shake
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Combine API/Options/Advanced/Development/Search tabs into one Options
tab and add a left nav for navigation categories.
Reduce information density for options table by making each row double
the height and slightly increasing widget sizes.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#73
## Description of change
Generated cards now start with E0040100 to fully match real cards. The
placeholder example `E004010000000000` is replaced with
`E0040100FFFFFFFF`.
The invalid placeholder/fallback PCBID `04040000000000000000` is
replaced with `01201000000000010101`, which contains a valid
header/checksum, making it closer resemble a real PCBID while still
clearly being an example.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Create three distinct layers for the overlay:
1. Bottommost persistent layer - non-interactable layer that is always
on. This was only for notifications, but now the FPS widget lives here
as well.
2. Overlay windows layer - most interactable windows go here.
3. Topmost main menu - this is reserved for the main menu (escape key)
and this is a modal dialog that occludes the layers below.
Why?
- `toggle overlay` behavior with FPS widget *also* toggling on/off was a
bit confusing (now they're two separate keys)
- FPS widget is popular, but it caused the entire overlay to be active,
which affects how input is handled
- the main menu being a standalone window was a little awkward (now it's
a modal)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#730
## Description of change
spicecfg is a 32-bit application. When it uses the ASIO SDK it only saw
the 32-bit drivers.
There are some ASIO drivers that have different names under 32-bit and
64-bit (Xonar AE is one of them)... so we have to manually scan the
registry and surface both the WOW32 and WOW64 nodes.
## Testing
<img width="329" height="309" alt="image"
src="https://github.com/user-attachments/assets/7abecf76-6835-4df5-8c2e-e7b425130f4c"
/>
Checked both 32-bit and 64-bit configurator, identical results.
## Description of change
**Configurator (spicecfg.exe)**
- Attempts to create a D3D9 device on startup and uses the hardware
ImGui DX9 path when successful; falls back to the existing software
rasterizer automatically if D3D9 init fails.
- Rewrites the configurator window loop: refresh-rate-aware render
timer, minimize/resize/`WM_DISPLAYCHANGE` handling, direct Win32 ->
ImGui input (keyboard, mouse, wheel), and optimized software painting
via `SetDIBitsToDevice` instead of per-frame GDI `HBITMAP` allocation.
**Overlay / input (scoped to standalone configurator)**
- Skips expensive per-frame rawinput polling in
`ImGui_ImplSpice_NewFrame` when `CONFIGURATOR_STANDALONE` is set (Win32
messages drive input instead).
- Adds software-renderer idle-frame detection (`sw_pixels_dirty` +
draw-data hash) so spicecfg only repaints when pixels actually change.
- Adds `ImGuiWindowFlags_NoScrollWithMouse` on the configurator root
window to prevent scroll jolt on non-scrollable child widgets.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Move resize logic from `EndScene` to `Present`/`PresentEx` (resolves
Live2D frame drops in some extreme settings)
Plug small memory leak
Remove unnecessary surface Lock/Unlock
## Testing
Tested IIDX, SDVX, DDR.
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Save config xml once instead of ~33 times
## Testing
xml is still saved properly
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Saving patches to file used to rewrite the file repeatedly, now it loads
and saves only once. Original file timestamp is now preserved on the
backup.
## Testing
Saved a very large patch set that used to take 10+ seconds; now it is
instant. Confirmed hex diffs are still accurate.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Subscreen overlay window used to draw above the main game surface, but
below any other ImGui widgets. Fix this so that the subscreen image is
drawn at the same z-level as the sub window itself.
This has been a long-standing issue - at least since 2023 when spice2x
first forked...
## Testing
Tested TDJ in windowed mode.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#134
## Description of change
Add ImGui DX11 backend implementation, and integrate into the spice
overlay.
The tricky part is that some of the Unity games:
1. Launch multiple windows, and
2. Can be resized (even full screen games launch at a certain resolution
and then expand to fit desktop resolution)
3. lazy load DX11 DLLs
This PR also adds screenshot functionality, but screen resize is not
implemented.
## Testing
Seems to be working for most games. Need to do final tests for:
- [x] CCJ (attract movie plays as well)
- [x] Busou Shinki (title movie plays)
- [x] MFG
- [x] QuizKnock
- [x] Polaris Chord
- [x] check dx9 for regression
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
When opening the patches tab by pressing F4 in game, the Save button
doesn't appear until after initially selecting/deselecting a patch, then
it shifts all of the patch text below. To solve this annoyance, this
keeps the Save button in a fixed position (starts greyed out until a
selection) and no longer shifts the text.
## Testing
Confirmed saving selected patches still works properly in the overlay
and standalone cfg
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Combine the two layout options into one
## Testing
- [x] windowed, x4
- [x] windowed, x2
- [x] windowed, x1 with sub
- [x] fs
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds toast notifications to the overlay.
Toast notifications are transient windows (shown for about 4 seconds).
These are drawn on top of the game even when the overlay is inactive
(i.e., when no window is open), and does not cause any input sink
behavior.
Add toasts for some common user-driven actions that could use a
notification, such as:
* screenshot
* card insert
* PIN macro
* API client connect/disconnect
* virtual printer
* screen resize toggle / scene switch
Add an option to change where the toasts are displayed, or to turn it
off entirely.
Add SDK function for it, and add it to the samples.
## Testing
Tested DDR (shown at bottom right, as is for most games) and RB (shown
top right by default).
## Link to GitHub Issue or related Pull Request, if one exists
#477
## Description of change
By default the game needs 4 monitors.
With the new option to disable subscreens, you can now boot fullscreen
with a single 4K monitor, with subscreen overlay enabled. Side monitors
are not shown in the overlay; only the touch screen is emulated.
## Future work
- [ ] custom resolution (-forceres) doesn't work properly (hooking
ResetEx does allow the game to boot but will render incorrectly;
probably needs hex edits)
- [x] enable this automatically if the user has fewer than 4 monitors
- [ ] ability to boot with a 4k main screen + small subscreen (with no
side screens which do nothing gameplay wise), but this whole display
emulation is a nightmare to work with & test thoroughly so it'll have to
be in the future.
## Testing
Checklist:
- [x] fs on 1 monitor with option set
- [x] fs on 2 monitor with option set
- [x] windowed - default (4 windows, no overlay)
- [x] windowed - with option set (1 window, overlay)
- [x] fs with 4 monitors?
- [x] check popn hc for regression
## Link to GitHub Issue or related Pull Request, if one exists
continuation of #677
## Description of change
When overlay was hidden, when mouse buttons were clicked, they were
queued up and replayed when overlay became visible again.
This is due to improper usage of `GetAsyncKeyState`, per documentation.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#675
Yet another regression from #604
## Description of change
When overlay was hidden (not visible) it was still accepting keyboard
input, so when it became visible again the queued up keystrokes got
processed all at once.
Also, fix a bug with monitor settings update kicking in when in windowed
mode - this really should have been only for full screen.
## Testing
Tested DDR windowed / full screen, TDJ with subscreen overlay windowed /
fullscreen.
bicarus