## Link to GitHub Issue or related Pull Request, if one exists
#201
## Description of change
- Adds MJPEG camera support using Media Foundation decoding.
- Moves camera capture to asynchronous Source Reader callbacks.
- Supports native NV12 and YUY2 capture, preferring target-sized native
formats over MJPEG when possible.
- Improves capture and rendering performance through callback-paced
reads, bulk frame uploads, optimized row-based flips, and lazy
allocation of flip textures.
- Makes runtime media-type changes interrupt pending reads and safely
flush and reconfigure the Source Reader.
- Improves automatic mode selection based on aspect ratio, proximity to
1280x720, frame rate, and capture format.
- Hardens camera shutdown, flush handling, media-type changes, and
repeated capture failures.
## Testing
Tested with two cameras in tdj
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Touch piano mode. Allows piano keys to be played with the touch screen.
Since the touch screen is still needed for menu navigation (including
during songs) a toggle switch is added so that the user can flip between
navigation mode and piano mode.
The touch targets are pixel-perfect. Don't let the game's piano
animations fool you.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Another bug reported by a sea creature
## Description of change
Fix keyboard navigation in Controllers sub tabs.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Reported by a certain sea reptile
## Description of change
Fix the + / - buttons for number patches not working. Regressed by one
of the ImGui version updates.
## Testing
seems fine now
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#635
## Description of change
Adds optional **button modifiers**, allowing a binding to require one or
more "modifier" buttons to be held before it activates.
- New "Modifiers" controller page in the overlay config to bind the
Modifier 1–4 source buttons.
- Each binding gains a 4-bit modifier_mask (Modifier 1-4). It is
persisted as an optional modifiers XML attribute on button nodes and
controller-preset entries. The attribute is optional and defaults to 0,
so existing config files and presets load unchanged and the feature is
off unless the user opts in.
- The button Edit properties popup gains a "Modifiers" dropdown to pick
which modifiers a binding requires. Doesn't apply to MIDI though.
- Input evaluation skips a binding whose required modifiers are not
held, falling through to its alternatives; velocity reporting uses the
same gated path.
- Controller-preset templates gain a "Modifiers" group for importing and
exporting.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Part 1 of many fixes for #814.
## Description of change
For the native touch hook - add code to inject synthetic touches using
Windows API (`InjectTouchInput`).
Note that this is Windows 8+ only, but we can make an assumption that we
are running on Win10+ for these games (TDJ/UFC/High Cheers) since the
cabs assume Win10.
Detect mouse events and allow IIDX poke to call into this to inject
synthetic touches.
Also, update the nativetouchhook to independently calculate window size
and rotation, instead of relying on rawinput layer.
## Testing
Tested to work with native touch option on IIDX, SDVX, POPN, all full
screen / windowed / sub on/off combinations.
Edge cases:
* sdvx main monitor rotated 270 deg
* touch invert option
* windowed mode resize / moved
All seem to work.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#245
## Description of change
Introduce patch groups. JSON schema now allows for a `"type": "group"`:
```json
{
"type": "group",
"gameCode": "LDJ",
"id": "timer-freeze",
"name": "Timer Freeze Patches",
"description": "Freezes various timers in the game."
},
{
"name": "Standard/Menu Timer Freeze",
"description": "Freezes all non-premium area timers.",
"caution": "",
"gameCode": "LDJ",
"type": "memory",
"group": "timer-freeze",
"patches": [
{
"offset": 9962743,
"dllName": "bm2dx.dll",
"dataDisabled": "0F84",
"dataEnabled": "90E9"
}
]
},
{
"name": "Premium Free Timer Freeze",
"description": "Freezes all premium area timers.",
"caution": "",
"gameCode": "LDJ",
"type": "memory",
"group": "timer-freeze",
"patches": [
{
"offset": 9111965,
"dllName": "bm2dx.dll",
"dataDisabled": "7E",
"dataEnabled": "EB"
}
]
},
```
In the UI, these will show up as tree nodes. The parent is not actually
treated as a patch; e.g., its state is not saved to the patch manager
config file; only the child patches states are managed, the parent's
state only bubble up only in the UI.
In downlevel versions of spice, group parents will show up as a patch of
invalid type. Child patches will still show up as individual patches.
## Testing
*how was the code tested?*
## Link to GitHub Issue or related Pull Request, if one exists
#345
## Description of change
If IIDX/SDVX/POPN "native touch" option is enabled, show an error
message if user toggles subscreen window.
Those options are meant for users with touch screens, and disables mouse
interactions. Users who like to randomly turn on options often latch on
to this option and get confused when clicks don't register.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Regressed by #793
## Description of change
Due to lock inversion, when binding an analog axis as a button, spice
deadlocks. Fix that.
Also create a separate `unordered_map` that keeps track of device
handles so that `WM_INPUT` handle can look up devices without having to
acquire the larger `devices_mutex` which could be held by (potentially)
lengthy operations like hotplug.
Fix more synchronization issues around hotplug. Latent bug exposed by
MIDI 2.0 issues.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Refactor patch manager.
This one file had the UI logic, config save/load, parsing patches JSON,
applying memory patches, everything all in one cpp file. Refactor and
separate out the layers.
## Testing
Sanity checked patch workflows.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds an overlay window widget for controlling OBS over WebSocket.
Add new lines to the FPS widget that shows recording / streaming timers.
Show notifications for major state changes (stream started/stopped,
recording started/paused/resumed/stopped)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Fully flush `tmp` file and then use `MoveFileExW` instead of `CopyFileW`
which guarantees atomic operation on NTFS.
## Testing
Enable left nav for Card tab, splitting the single page into multiple
sub tabs.
Card Manager is now embedded in this UI (but can still be launched as a
separate window)
## Link to GitHub Issue or related Pull Request, if one exists
#747
## Description of change
The old approach called ImGui’s `SetScrollHereY()` while the options
list was still being laid out. That caused one-frame scroll corrections
and edge-snap jitter near scroll boundaries.
The new approach in `build_options_tab()`:
1. **On click** - set a flag (`options_scroll_pending` for categories,
`options_scroll_top` for group headers).
2. **During layout** - when building the target category, record its
content position with `GetCursorPosY()` (don’t scroll yet).
3. **After all options are built** - apply scroll once by setting
`window->Scroll.y` directly, and only if the position actually needs to
change (0.5px threshold).
That deferred, single-pass scroll avoids the shake while still
supporting scroll-up, scroll-down, and re-click-to-recenter.
## Testing
In spicecfg.exe and in-game overlay, Options tab:
Open groups with many categories
Scroll content down manually, then click a higher category in the left
nav - content scrolls up to that section
Re-click the same category after manual scroll - jumps back without
shake
Rapid re-clicks when already aligned - no jitter
Switch group headers - still scrolls to top; re-click at top - no shake
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Combine API/Options/Advanced/Development/Search tabs into one Options
tab and add a left nav for navigation categories.
Reduce information density for options table by making each row double
the height and slightly increasing widget sizes.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#73
## Description of change
Generated cards now start with E0040100 to fully match real cards. The
placeholder example `E004010000000000` is replaced with
`E0040100FFFFFFFF`.
The invalid placeholder/fallback PCBID `04040000000000000000` is
replaced with `01201000000000010101`, which contains a valid
header/checksum, making it closer resemble a real PCBID while still
clearly being an example.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Create three distinct layers for the overlay:
1. Bottommost persistent layer - non-interactable layer that is always
on. This was only for notifications, but now the FPS widget lives here
as well.
2. Overlay windows layer - most interactable windows go here.
3. Topmost main menu - this is reserved for the main menu (escape key)
and this is a modal dialog that occludes the layers below.
Why?
- `toggle overlay` behavior with FPS widget *also* toggling on/off was a
bit confusing (now they're two separate keys)
- FPS widget is popular, but it caused the entire overlay to be active,
which affects how input is handled
- the main menu being a standalone window was a little awkward (now it's
a modal)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#730
## Description of change
spicecfg is a 32-bit application. When it uses the ASIO SDK it only saw
the 32-bit drivers.
There are some ASIO drivers that have different names under 32-bit and
64-bit (Xonar AE is one of them)... so we have to manually scan the
registry and surface both the WOW32 and WOW64 nodes.
## Testing
<img width="329" height="309" alt="image"
src="https://github.com/user-attachments/assets/7abecf76-6835-4df5-8c2e-e7b425130f4c"
/>
Checked both 32-bit and 64-bit configurator, identical results.
## Description of change
**Configurator (spicecfg.exe)**
- Attempts to create a D3D9 device on startup and uses the hardware
ImGui DX9 path when successful; falls back to the existing software
rasterizer automatically if D3D9 init fails.
- Rewrites the configurator window loop: refresh-rate-aware render
timer, minimize/resize/`WM_DISPLAYCHANGE` handling, direct Win32 ->
ImGui input (keyboard, mouse, wheel), and optimized software painting
via `SetDIBitsToDevice` instead of per-frame GDI `HBITMAP` allocation.
**Overlay / input (scoped to standalone configurator)**
- Skips expensive per-frame rawinput polling in
`ImGui_ImplSpice_NewFrame` when `CONFIGURATOR_STANDALONE` is set (Win32
messages drive input instead).
- Adds software-renderer idle-frame detection (`sw_pixels_dirty` +
draw-data hash) so spicecfg only repaints when pixels actually change.
- Adds `ImGuiWindowFlags_NoScrollWithMouse` on the configurator root
window to prevent scroll jolt on non-scrollable child widgets.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Move resize logic from `EndScene` to `Present`/`PresentEx` (resolves
Live2D frame drops in some extreme settings)
Plug small memory leak
Remove unnecessary surface Lock/Unlock
## Testing
Tested IIDX, SDVX, DDR.
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Save config xml once instead of ~33 times
## Testing
xml is still saved properly
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Saving patches to file used to rewrite the file repeatedly, now it loads
and saves only once. Original file timestamp is now preserved on the
backup.
## Testing
Saved a very large patch set that used to take 10+ seconds; now it is
instant. Confirmed hex diffs are still accurate.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Subscreen overlay window used to draw above the main game surface, but
below any other ImGui widgets. Fix this so that the subscreen image is
drawn at the same z-level as the sub window itself.
This has been a long-standing issue - at least since 2023 when spice2x
first forked...
## Testing
Tested TDJ in windowed mode.
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
When opening the patches tab by pressing F4 in game, the Save button
doesn't appear until after initially selecting/deselecting a patch, then
it shifts all of the patch text below. To solve this annoyance, this
keeps the Save button in a fixed position (starts greyed out until a
selection) and no longer shifts the text.
## Testing
Confirmed saving selected patches still works properly in the overlay
and standalone cfg
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Combine the two layout options into one
## Testing
- [x] windowed, x4
- [x] windowed, x2
- [x] windowed, x1 with sub
- [x] fs
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds toast notifications to the overlay.
Toast notifications are transient windows (shown for about 4 seconds).
These are drawn on top of the game even when the overlay is inactive
(i.e., when no window is open), and does not cause any input sink
behavior.
Add toasts for some common user-driven actions that could use a
notification, such as:
* screenshot
* card insert
* PIN macro
* API client connect/disconnect
* virtual printer
* screen resize toggle / scene switch
Add an option to change where the toasts are displayed, or to turn it
off entirely.
Add SDK function for it, and add it to the samples.
## Testing
Tested DDR (shown at bottom right, as is for most games) and RB (shown
top right by default).
## Link to GitHub Issue or related Pull Request, if one exists
#477
## Description of change
By default the game needs 4 monitors.
With the new option to disable subscreens, you can now boot fullscreen
with a single 4K monitor, with subscreen overlay enabled. Side monitors
are not shown in the overlay; only the touch screen is emulated.
## Future work
- [ ] custom resolution (-forceres) doesn't work properly (hooking
ResetEx does allow the game to boot but will render incorrectly;
probably needs hex edits)
- [x] enable this automatically if the user has fewer than 4 monitors
- [ ] ability to boot with a 4k main screen + small subscreen (with no
side screens which do nothing gameplay wise), but this whole display
emulation is a nightmare to work with & test thoroughly so it'll have to
be in the future.
## Testing
Checklist:
- [x] fs on 1 monitor with option set
- [x] fs on 2 monitor with option set
- [x] windowed - default (4 windows, no overlay)
- [x] windowed - with option set (1 window, overlay)
- [x] fs with 4 monitors?
- [x] check popn hc for regression
## Link to GitHub Issue or related Pull Request, if one exists
continuation of #677
## Description of change
When overlay was hidden, when mouse buttons were clicked, they were
queued up and replayed when overlay became visible again.
This is due to improper usage of `GetAsyncKeyState`, per documentation.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#181
## Description of change
Implement analog relative mode and delay option using a new
millisecond-based algorithm.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Add a checkbox to the buttons edit dialog that lets you set a device as
"always on", accomplished by setting the device to `Naive`, vkey to
`0xff` (invalid), and `Invert`.
No backend rawinput changes.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Related to #181
## Description of change
This PR removes two features marked as "experimental" for analog axis -
`Delay` and `Relative Axis`.
They have been in spice as experimental option for almost 2 years.. but
they have a fundamental problem of being tied to how often the analog is
polled. Not just how often the game's I/O emulation code polls it, but
literally any source (spice API, overlay, etc).
For `Delay`, the only real usage I'm aware of is for #181 which is
delaying IIDX turntable input. For this, I will follow up with a
separate PR that adds back the delay option specifically for IIDX.
For `Relative Axis` - I'm not quite sure if any one actually uses this.
This could be implemented per-game if some game demands it. Polaris
Chord already has one, for example.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Currently, all analogs are treated as circular values that wrap around.
This works for knobs and turntables, but can get weird for linear values
(like tilt sensors and sliders) especially once analog options are
enabled, such as sensitivity.
This PR groups analogs into 3 buckets: circular, linear (centered), and
linear (positive). Linear types get different algorithms applied to it
when options are set (e.g., sensitivity caps out at 0, 1 instead of
wrapping around).
In linear mode:
* Sensitivity value applies an exponential response curve (power curve)
to the original value.
* Multiplier/divisor serves as a linear cut-off.
* Relative mode works as you expect, but of course, values don't wrap
around.
* Invert and deadzone work as you expect (since they applied to the
controller input anyway)
* Smoothing is removed from the UI and has no effect.
* Delay is unaffected.
Also, fix a small bug with -/+ button not working for analog `Delay`
option.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Some crappy DDR soft mats (either USB-based or console pads with crappy
adapters that lack a dedicated "DDR pad mode") use X and Y analog axis
for arrows, which means they cannot cleanly report Up+Down or Left+Right
input.
According to some ancient Stepmania code, a lot of these report a middle
value (value between center and right, for example, for left+right).
Borrow this hack from Stepmania and implement it in spice as analog
input for DDR.
Also, for rawinput/xinput automatic bind scenario, update the logic so
that face buttons are always detected before analog axis / dpads for
consistency. This would help with binding any DDR pads that
simultaneously input face buttons / dpad / analog axis, so that we can
prefer face buttons when detected.
## Testing
I don't have any soft mats that have this, but it was tested with an
xbox controller.
As noted in #567, a filesystem path that contains non-ascii will break a
lot if using a clang toolchain.
Luckily, fmtlib has a lossy utf8 convert when you use it to print a path
(after including `fmt/std.h`). The vast majority of this diff is just
removing `.string()` from paths inside loggings calls.
There are some callsites I _didn't_ touch, mainly the options, because
it would be an ABI break to change those to be wide strings and I cbf
looking into settings upgrades. There are also some spots (avs mountpath
remapping, for example) where the path is guaranteed to be ascii, so I
didn't modify them.
ImGui doesn't appear to easily support wide strings (I mean, surely it
does, but I'm not gonna look too far into it) so I mostly just left
those alone too, with a few spots modified to re-use fmtlib's lossy
utf8.
Some of the changes are basically never gonna be hit IRL, like who would
put a file with a non-ascii _extension_ along with their modules? But
the diff is (I hope) pretty easy to validate as OK.
Testing has been somewhat minimal, I fired up the GCC build of spice2x
in a dodgy folder name, got mojibake (running via wine in linux so take
that as you will), ran the unmodified clang spice and crashed the same
way the reporter did. After modification, I get the exact same mojibake
so I assume if the terminal enjoys utf8 it'll display OK.
Claude (only used for review) thinks the commit is fine but is annoyed
that I use `fmt::detail` in the appdata censoring, which is part of the
private API; personally I don't care because it's pretty stable.
## Link to GitHub Issue or related Pull Request, if one exists
#653
## Description of change
By default, BAT Positive / Negative binds trigger when the stick is
tilted 10% off the center.
This needs a bit more customization since:
1. User may want to customize the center point (e.g., guitar controller
neutral position)
2. User may want to adjust the sensitivity (e.g., guitar controller tilt
angle to trigger wailing).
## Testing
WIP
bicarus