## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Add a checkbox to the buttons edit dialog that lets you set a device as
"always on", accomplished by setting the device to `Naive`, vkey to
`0xff` (invalid), and `Invert`.
No backend rawinput changes.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Related to #181
## Description of change
This PR removes two features marked as "experimental" for analog axis -
`Delay` and `Relative Axis`.
They have been in spice as experimental option for almost 2 years.. but
they have a fundamental problem of being tied to how often the analog is
polled. Not just how often the game's I/O emulation code polls it, but
literally any source (spice API, overlay, etc).
For `Delay`, the only real usage I'm aware of is for #181 which is
delaying IIDX turntable input. For this, I will follow up with a
separate PR that adds back the delay option specifically for IIDX.
For `Relative Axis` - I'm not quite sure if any one actually uses this.
This could be implemented per-game if some game demands it. Polaris
Chord already has one, for example.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Currently, all analogs are treated as circular values that wrap around.
This works for knobs and turntables, but can get weird for linear values
(like tilt sensors and sliders) especially once analog options are
enabled, such as sensitivity.
This PR groups analogs into 3 buckets: circular, linear (centered), and
linear (positive). Linear types get different algorithms applied to it
when options are set (e.g., sensitivity caps out at 0, 1 instead of
wrapping around).
In linear mode:
* Sensitivity value applies an exponential response curve (power curve)
to the original value.
* Multiplier/divisor serves as a linear cut-off.
* Relative mode works as you expect, but of course, values don't wrap
around.
* Invert and deadzone work as you expect (since they applied to the
controller input anyway)
* Smoothing is removed from the UI and has no effect.
* Delay is unaffected.
Also, fix a small bug with -/+ button not working for analog `Delay`
option.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Some crappy DDR soft mats (either USB-based or console pads with crappy
adapters that lack a dedicated "DDR pad mode") use X and Y analog axis
for arrows, which means they cannot cleanly report Up+Down or Left+Right
input.
According to some ancient Stepmania code, a lot of these report a middle
value (value between center and right, for example, for left+right).
Borrow this hack from Stepmania and implement it in spice as analog
input for DDR.
Also, for rawinput/xinput automatic bind scenario, update the logic so
that face buttons are always detected before analog axis / dpads for
consistency. This would help with binding any DDR pads that
simultaneously input face buttons / dpad / analog axis, so that we can
prefer face buttons when detected.
## Testing
I don't have any soft mats that have this, but it was tested with an
xbox controller.
As noted in #567, a filesystem path that contains non-ascii will break a
lot if using a clang toolchain.
Luckily, fmtlib has a lossy utf8 convert when you use it to print a path
(after including `fmt/std.h`). The vast majority of this diff is just
removing `.string()` from paths inside loggings calls.
There are some callsites I _didn't_ touch, mainly the options, because
it would be an ABI break to change those to be wide strings and I cbf
looking into settings upgrades. There are also some spots (avs mountpath
remapping, for example) where the path is guaranteed to be ascii, so I
didn't modify them.
ImGui doesn't appear to easily support wide strings (I mean, surely it
does, but I'm not gonna look too far into it) so I mostly just left
those alone too, with a few spots modified to re-use fmtlib's lossy
utf8.
Some of the changes are basically never gonna be hit IRL, like who would
put a file with a non-ascii _extension_ along with their modules? But
the diff is (I hope) pretty easy to validate as OK.
Testing has been somewhat minimal, I fired up the GCC build of spice2x
in a dodgy folder name, got mojibake (running via wine in linux so take
that as you will), ran the unmodified clang spice and crashed the same
way the reporter did. After modification, I get the exact same mojibake
so I assume if the terminal enjoys utf8 it'll display OK.
Claude (only used for review) thinks the commit is fine but is annoyed
that I use `fmt::detail` in the appdata censoring, which is part of the
private API; personally I don't care because it's pretty stable.
## Link to GitHub Issue or related Pull Request, if one exists
#653
## Description of change
By default, BAT Positive / Negative binds trigger when the stick is
tilted 10% off the center.
This needs a bit more customization since:
1. User may want to customize the center point (e.g., guitar controller
neutral position)
2. User may want to adjust the sensitivity (e.g., guitar controller tilt
angle to trigger wailing).
## Testing
WIP
## Description of change
`std::ostringstream.str()` returns a temporary string so it's invalid to
obtain c_str from it and pass it around.
## Testing
wip
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Allow DDR to be launched in borderless window (honor the spicecfg
option).
Prevent Gitadora arena model from changing the window decoration once
launched as it hangs the game.
## Testing
Tested 32/64bit ddr, gitadora arena.
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
Add overlay for subscreen.
Add an option for no subscreen window.
Use the same "force redraw subscreen" logic we used in SDVX to fix the
same issue.
Known issues:
* still crashing when running windowed if there is only one monitor
* having only one monitor causes sunscreen overlay to not work
(NumberOfAdaptersInGroup issue?)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#616
## Description of change
The IDs don't really get used anywhere if it's not a real HID or MIDI
device, but putting them for completeness since they show up in Controls
overlay menu.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
The game expects the main display to be *not* HDMI, and at port 2.
Hooking DisplayConfigGetDeviceInfo allows us to boot the game on any
monitor.
Add basic I/O hook. It gets stuck in `USB I/O Checking...` for a couple
minutes but it'll eventually skip and boot to title screen.
## Testing
ugh.
## Link to GitHub Issue or related Pull Request, if one exists
#616
## Description of change
`Naive` button is now called `Naive/XInput` and detects XInput
controllers
Add vibration output as "Lights"
Add proper hotplug support and multiple controllers
Fix misc bugs on x86
## Testing
I tested with two xbox controllers.
## Link to GitHub Issue or related Pull Request, if one exists
#616
## Description of change
Adds preliminary support for XInput controllers. Enough to manually bind
buttons and map analogs.
This was a lot more background work than expected, but that is the
nature of unnecessary hobbies I guess. Most things in here are obvious,
so here's the non-obvious thoughts and notes:
1. All the XP stuff is optional, if the toolchain isn't available it
won't even try
2. The docker build is the "known good" build and now has all the
required tools for XP and checking binaries
a. If you're OK with it, can add the XP_MUST_BUILD flag to
build_docker.sh
4. New `SPICE_XP` flag to comment out blocks
5. We could technically build using the Docker image I've made for my XP
compatible LLVM toolchain, but combining the binaries into a single zip
at the end of it is somewhat tedious, so I've chosen to grab the
binaries from my release
6. I also wrote a DLL checker to make sure the final binaries are
_actually_ XP compatible, which found some issues on x86_64 (I don't
know a single game that runs on 64 bit XP, but it wasn't too much effort
so whatever). This also won't run if missing, just to save the trouble.
7. The build script is still pretty shit, I've made some minor
improvements
a. `/usr/bin/env bash` instead of `/bin/bash` as it's more correct
b. Adding `-it` to the docker build, so Ctrl+C actually halts it
c. Main issue is that failures don't halt, because of the custom error
catching function. This has caused a lot of frustration, maybe we can
change that
## Testing
It runs on 32 and 64 bit installs of XP. My jubeat cab is on Win10 these
days and I haven't got around to testing an actual game, but I've
distributed test builds of this to people who *have* confirmed it works
as expected.
## Description of change
Adds `-mainmonitor` option which changes the monitor layout before
launching the game. This is much more reliable than the old `-monitor`
option which operated at DX9 level. This works for TDJ/UFC subscreens,
for example.
Rename `-monitor` option to `-dx9mainadapter` to discourage use.
`-monitor` will continue to work, of course.
Changing of primary monitor happens first before any orientation changes
/ refresh rate changes, which means those options will result in the
logically correct configuration.
Create a new option category for `Monitor` (rotate, refresh rate, etc).
Add a monitor selection widget for `-mainmonitor` option in the
configurator.
Improve how we log names of monitors in the log during boot - should be
less of "Generic PnP Monitor" after this.
## Link to GitHub Issue or related Pull Request, if one exists
#287
## Description of change
Switch over to new event-based I/O system in ImGui so that we can keep
up with ImGui updates.
Unlike #287, this change does not modify how mouse position is handled.
That continues to be supported by newer versions of ImGui.
## Testing
wip
## Link to GitHub Issue or related Pull Request, if one exists
#593
## Description of change
* Display a confirmation dialog when clicking on `Generate` for the
first time (to prevent accidental loss of card number)
* If `cardN.txt` contents are read back successfully, show card number
in green to indicate success, and red in case of failure.
## Description of change
Merge option name and command line parameter columns.
Expand the size of widget column.
In Search tab, add a new column to display the category.
Add a highlight effect to rows when hovered over - apply this to all
tables in the configurator UI.
## Link to GitHub Issue or related Pull Request, if one exists
#345
## Description of change
When X or Y axis is being bound to any button labeled `TT` or `Knob` or
`VOL-`, show a warning and ask if the user really meant to do that,
encouraging them to use the Analog tab instead.
* add `-card0` `-card1` options at the top of Cards tab to clearly
indicate that they take precedence over card files
* reorganize UI / clean up
* remove ability to directly edit the contents of `card0.txt` /
`card1.txt` as that wasn't very intuitive; instead, encourage users to
use overrides directly or use an external text editor (`Edit` button
opens notepad)
## Link to GitHub Issue or related Pull Request, if one exists
#579
## Description of change
* Fix profiles being loaded twice on tab switch
* Add more default profiles for some controllers
* Remove borders from tables since they look broken in software renderer
* Add check boxes to import/export only certain parts of of a profile
* Show device identifier string in drop down when applying profiles
since some controllers have multiple identically named interfaces
* Show completion message when action buttons are clicked (`Apply`
button, `Clear all bindings` button both become disabled & shows `done`
message)
## Link to GitHub Issue or related Pull Request, if one exists
Implements #579.
## Description of change
### Controller Presets
Add a new "Presets" tab to spicecfg that allows users to save, load, and
manage controller binding presets.
#### Save Presets
- Capture all current button, analog, and light bindings as a preset
- "Assign Labels" dialog prompts the user to name each source device
(e.g. "Player 1", "Player 2") before saving
- Device IDs are replaced with these labels, making presets portable
across different machines
- Presets are stored in `%APPDATA%/spice2x/spicetools_presets.xml`
#### Load / Apply Presets
- Preset list shows name, type (Built-in / User), and binding counts
- Apply dialog maps each preset source label to a connected device or
keyboard
- Bindings are applied per-source, supporting multi-device setups (e.g.
two PHOENIXWAN controllers)
#### Edit / Delete Presets
- Rename source labels in saved presets (propagates to all bindings)
- Delete user presets
#### Built-in Presets
- PHOENIXWAN preset for Beatmania IIDX: P1/P2 buttons (1-7, Start,
EFFECT, VEFX), turntable analogs, and button lights
## Testing
* [x] Open spicecfg, go to Buttons tab, verify Presets section loads
* [x] Verify PHOENIXWAN builtin preset appears for Beatmania IIDX
* [x] Save a new preset: confirm "Assign Labels" dialog appears with
device descriptions as defaults
* [x] Apply a preset: confirm source column shows labels, popup does not
shrink
* [x] Edit labels on a saved preset: confirm rename propagates to all
bindings
* [x] Hover over a device source tooltip: confirm vKey shows as number
## Link to GitHub Issue or related Pull Request, if one exists
#578
## Description of change
Use `Clear All` when there are no defaults, and `Reset All` when there
are defaults.
Clearing analogs should reset values to 0.5, not 0.
## Link to GitHub Issue or related Pull Request, if one exists
#576
## Description of change
Add `Reset All` buttons to these tabs which clears out bindings to none
/ default.
For keypads, introduce a special `Use Preset` button which lets users
pick between numpad and top row number keys.
Update UI-visible string used for vKeys, especially the numpad ones
(e.g., `.` is now `Numpad .` to distinguish from the regular `.`
period).
Breaking change: if the user never had `P1 Keypad 00` set, the default
will change from `Enter` to `Numpad -` since both enter keys trigger the
same. This will affect a small number of popn/ddr players. They can just
change it back.
## Testing
*how was the code tested?*
## Link to GitHub Issue or related Pull Request, if one exists
#574
## Description of change
Refactor so that grouping of lights are in common I/O code. Add this to
IIDX/SDVX/DDR/GitaDora.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#574
## Description of change
* Add binds for Nostroller
* Update matching logic to ignore common device-side output names like
"Button" "Light" and "LED" (e.g., `Button 1` from a device now matches
on `P1 1`)
* For RGB matching, in addition to `Light R` on the device also try
`LightR` (Nostroller needs this)
* Add a confirmation dialog for `Clear All`
* Address minor bugs
## Testing
Seems to work on arcin, and Nostroller. Still need to retest Faucetwo.
Hopefully I didn't break Phoenixwan.
<img width="784" height="561" alt="image"
src="https://github.com/user-attachments/assets/3ac6bf6d-2ca8-40e5-80ea-b0fd9e080d7b"
/>
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
I've always been annoyed with how long it takes to bind controller
lights, made a few improvements
1) added a button+window for automatically matching device lights to
game lights with the same name
2) added button(s) to cycle through all bound lights to visually confirm
location/function
3) added button to clear all bound lights
4) split SDVX lights into sections (Buttons, Valkyrie, Nemsys, Other)
with formatting, sorted based on current game spec
## Testing
Tested with multiple games and controllers (Faucetwo, custom con) and
matching always works if the descriptor strings are labeled correctly.
Not every controller labels their LEDs the same was as spice, but for
those that do this saves a ton of time clicking every box and testing
one by one.
The SDVX table split/formatting is important because myself (and several
friends) have tried binding to Wing/Controller lights and wondered why
they weren't working in game, when they are legacy Nemsys lights instead
of the strip lights handled by Valk/bi2x. I separated the sections
visually, with tooltips, plus sort the two sections based on active spec
to further minimize the chance of someone trying to use the wrong lights
for their game.
## Description of change
* Show more descriptive error when connection fails (for
`ERROR_WINHTTP_NAME_NOT_RESOLVED`)
* ensure patches are reloaded even if importing fails, since existing
checkboxes get reset
- Include order and forward decls were breaking button.h because a
declared but not defined struct can't be initiated (honestly this file
was cooked, crazy include order).
- `MAXINT` is GCC specific, `INT_MAX` is portable.
- InterlockedDecrement takes a LONG, not ULONG
- an imgui printf-style call using a direct string instead of %s (let's
ignore the fact that it's actually safe based on how the str is
constructed)
- missing `override` on a virtual subclass
- `CALLBACK` on a lambda threw me for a loop, but I believe moving it
after the arg list is the correct approach (see if it builds on gcc I
guess)
- `std::result_of` was removed in C++20, which the project is built with
## Link to GitHub Issue or related Pull Request, if one exists
## Description of change
Introduce a new modal dialog for picking out some of the options to
improve UX.
Implemented a few for now:
1. UI for picking ASIO drivers from a list (for -iidxasio, -sdvxasio,
-asioconvert, etc)
2. Button to generate card numbers for -card0 and card1
3. Processor Affinity selector (very similar to what's in Windows Task
Manager, list of checkboxes)
4. file selector (file open dialog for various file path overrides like
log file)
5. folder selector (folder override)
I wrote a selector for COM ports as well but how we use the value was
inconsistent (\\\\.\\COMx vs. COMx) and didn't see a huge point in it so
I didn't check it in.
## Testing
## Link to GitHub Issue, if one exists
#345
## Description of change
When DLL is configured to use TDJ I/O but spice is in LDJ mode, show an
error in LED ticker suggesting the user to turn on `-iidxtdj`.
When DLL is configured to use LDJ I/O but spice is in TDJ mode, show an
error in TDJ overaly suggesting the user to fix the DLL.
Fix a small bug that caused a white window to be created when `-w` is
enabled even when `-iidxtdj` is not, but DLL is using TDJ I/O.
## Link to GitHub Issue, if one exists
## Description of change
Some parts of the UI (e.g., Card tab) rely on early auto detection of
the game, which relies on file hints and not the game code. Two games
(PC and MFG) rely on directory presence and not file presence.
bicarus