## Link to GitHub Issue or related Pull Request, if one exists
Continues #899
## Description of change
#899 added the ability to display the gitadora subscreen in lanscape
mode with black bars on the side. With the new option the black bars can
instead display the LEFT / RIGHT screens, completing the two-monitor
full screen use case for arena model.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Arena Model's SMALL touch subscreen is a portrait (800x1280) panel -
however, it's common for people to set up a touch screen in landscape
orientation since IIDX/SDVX/popn all use landscape.
Add a new option, `-gdsublandscape`, which forces the subscreen to
launch at 1080p landscape. The image is rendered with black bars on the
sides. Touches will be unaligned initially; user needs to go into test
mode and recalibrate. In reality this option is just a short hand for
`-forceressub 1920,1080`.
Wire up `-forceressub` which previously didn't work for gitadora, so
that a resolution other than 1080p can be used in either orientation. In
other games `-forceressub` just forces the rendering resolution and
IIDX/SDVX/popn's game engine automatically stretches to fill... however
for gitadora it works differently since we want to keep the aspect ratio
of the original screen; it instead hijacks the back buffer and makes the
game draw to an intermediate buffer.
## Testing
When Down Motion button is bound, install hooks into the game that
detects down movement via patches.
When Disable Touch option is enabled, don't install touch hooks.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#114
## Description of change
Initial support for Silent Scope: Bone Eater, enough to be playable;
doesn't include QoS work needed to make this a smoother experience.
* Game detection
* Fix DX11 overlay to work with non-Unity games
* Implements sub monitor i/o (only really needed to get past I/O check)
* Try to make the game reasonably playable with a mouse
* Ignore the game's attempt to move windows, position them in a
reasonable place
* Fix language hook
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Fix the issue with popn lights flickering.
`SetTapeLedDataPart()` updates BI3A’s internal LED buffer without
immediately sending it to hardware. High Cheers briefly clears this
buffer before writing the complete set of lights.
Stage pin-0 (button light) updates in the hook and publish only the
latest frame during `GetDeviceStatus()`, matching real BI3A behavior.
This prevents temporary clear frames from reaching HID controllers.
## Testing
Tested with my iidx controller with HID lights.
## Link to GitHub Issue or related Pull Request, if one exists
#345
## Description of change
**IIDX TDJ rom probe no longer touches removable media** —
`C:\000rom.txt` and `D:\001rom.txt` are not emulated paths; they hit
whatever is actually mounted on the user's machine. `D:` is commonly an
optical drive or card reader, and the launcher clears
`SEM_FAILCRITICALERRORS` process-wide before attach, so an empty drive
raises the modal *"insert a disk"* dialog and blocks the attaching
thread. The probe now checks `GetDriveTypeW` and only reads fixed and
RAM disks.
**`iat_find` no longer calls `log_fatal` on an unparseable module** —
`iat_try(nullptr)` walks every loaded module, including foreign ones
(injected, manually mapped, header wiped by AV/EDR/overlays). A non-`MZ`
DOS header called `log_fatal`. There is nothing to hook in such a
module, so it is skipped.
**`logger::stop()` can no longer hang forever** — hook installation
suspends every other thread, including the logging thread. `stop()`
unconditionally joined that thread, so `log_fatal` and the 30-second
`show_popup` watchdog both wedged instead of terminating, and logging is
asynchronous so nothing reached log.txt either. It now waits with a
timeout, then detaches and flushes synchronously.
**`GetFileSizeEx` was never hooked** — the hook was registered under the
name `"GetFileSize"`, so it re-patched that slot instead.
**Warn when `-modules` is set** — it changes where the game is run from,
and is usually set accidentally.
## Testing
*how was the code tested?*
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Fix mouse and touch API handling for gitadora.
* hook native touch in every arena window mode (previously only using
wintouchemu for 1 windowed mode)
* publish the touch window (SMALL panel, or the main window drawing the
overlay) and only attach injection there
* route touch on the SMALL window straight through instead of the
overlay transform, and accept the mouse only there
* fix spiceapi by forcing 800x1280 touch canvas size
* run API capture before the subscreen present to fix api not showing
sub image
## Testing
Test:
gitadora 1/2/4 windowed mode, fullscreen
iidx /sdvx / popn windowed/fullscreen for regressions
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#852
## Description of change
Add SDVX valk cab tape LED output over API
## Testing
tested with custom python script over api
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#855
## Description of change
Legacy camera hooks are specifically for IIDX 25/26 and they only
perform redirection of device discovery (emulates USB vendor/device ID
and USB port). It has very limited use since most cameras are
practically unusable in IIDX 25/26. Don't enable it, unless explicitly
requested by the user.
New truth table for `-iidxcabcams` :
| Mode | `-iidx` off (cab setup) | `-iidx` on |
|---|---|---|
| `auto` | Native cameras enabled (same as `on`) | Cameras disabled
(same as `off`) |
| `off` | Cameras disabled | Cameras disabled |
| `on` | Native cameras enabled | Native cameras enabled |
| `legacy` | Native cameras enabled | IIDX 25/26 discovery emulation
enabled |
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
There is a patch for GITADORA series that fixes frame pacing on modern
Windows. Turn it into a signature patch and embed it into the game.
## Testing
should work for all 64-bit gitadora versions, pre-GWD
## Link to GitHub Issue or related Pull Request, if one exists
Fixed https://github.com/spice2x/spice2x.github.io/issues/740
## Description of change
- Enable native D3D9 adapter-group dual fullscreen for the GITADORA
Arena model when the two-screen MAIN + SMALL configuration is selected
without windowed mode.
- Present MAIN and SMALL on their respective monitor heads while keeping
the invisible LEFT and RIGHT targets offscreen.
- Scope the new fake-swap-chain query behavior to the hidden GITADORA
two-head targets, preserving existing behavior for other games and
configurations.
The existing borderless-windowed two-screen path could not consistently
keep input and game timing synchronized and also reduced rendering
performance. Native dual fullscreen avoids that windowed composition
path.
## Testing
- Manually tested GITADORA Arena with separate MAIN and SMALL monitors
in fullscreen mode. Windowed mode still works if the user chooses to use
that.
- Confirmed both displays render correctly, touch input works on the
SMALL screen, gameplay input stays synchronized, and gameplay holds a
steady 60 FPS.
- Built `spicetools_spice64` at commit `e4a98e9` with the repository
Docker toolchain.
- Confirmed no new compiler warnings.
- Confirmed the forbidden static DLL import check passes.
- Confirmed the Windows 7 DLL compatibility check reports `All DLLs
OK!`.
---------
Co-authored-by: vgod <428979+vgod@users.noreply.github.com>
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
- Replace unnecessary precision timers with standard sleeps to reduce
wakeups and background CPU usage.
- Reuse buffers in raw input, touchscreen, and HID output paths to
eliminate steady-state allocations.
- Pre-index HID button groups and correctly process batched HID reports.
No functional changes.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#201
## Description of change
- Adds MJPEG camera support using Media Foundation decoding.
- Moves camera capture to asynchronous Source Reader callbacks.
- Supports native NV12 and YUY2 capture, preferring target-sized native
formats over MJPEG when possible.
- Improves capture and rendering performance through callback-paced
reads, bulk frame uploads, optimized row-based flips, and lazy
allocation of flip textures.
- Makes runtime media-type changes interrupt pending reads and safely
flush and reconfigure the Source Reader.
- Improves automatic mode selection based on aspect ratio, proximity to
1280x720, frame rate, and capture format.
- Hardens camera shutdown, flush handling, media-type changes, and
repeated capture failures.
## Testing
Tested with two cameras in tdj
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#833
## Description of change
Last couple PRs - such as #820#827#828 - made the native touch hook &
touch injection using `InjectTouchInput` the default path, since it
performs much more reliably with both real touch screens and mouse (or
any other synthetic source).
However, user has reported that WINE lacks `InjectTouchInput` which
means this won't work.
As a fix, revive the old wintouchemu code. Native touch is still the
default, but under following circumstances:
1. if `-touchemuforce` is set, or
2. if any of the required Windows touch APIs are unavailable
then we fail over from native touch to wintouchemu code.
For Linux, condition #2 would be hit during init, and gracefully switch
over.
Caveat: the poke code for IIDX and Nost will continue to require native
touch, I do not want to maintain two paths for this. This means that
iidx poke will stop working on Linux, unfortunately.
## Testing
Tested on Windows with `-touchemuforce` set. This is mostly reverting
Linux code path back to where we were last release, so this should just
work with wine.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Touch piano mode. Allows piano keys to be played with the touch screen.
Since the touch screen is still needed for menu navigation (including
during songs) a toggle switch is added so that the user can flip between
navigation mode and piano mode.
The touch targets are pixel-perfect. Don't let the game's piano
animations fool you.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#814
## Description of change
Make gitadora arena model use native touch instead of wintouchemu. Only
single window mode with overlay is affected.
This removes the last consumer of `INJECT_MOUSE_AS_WM_TOUCH` so all of
that code can be deleted.
## Testing
Tested touch screen and mouse interaction with single window mode.
## Link to GitHub Issue or related Pull Request, if one exists
#814
## Description of change
Switch over Nostalgia from wintouchemu to native touch hook.
Nostalgia has some strict timing requirements (touches must be updated
on every acio poll) so this takes a slightly different path to maintain
mouse holds.
Only a handful of consumers of wintouchemu remain:
1. beatstream - but it's off by default, only enabled as errata for
buggy touchscreens, or if the user forces it on (for Show Cursor)
2. gitadora single-window overlay - this is just for mouse so not a big
deal.
3. MFC HG mode - not a priority to fix.
## Testing
Tested full screen and windowed mode with touch / mouse / poke.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#814
## Description of change
Remove iidx/sdvx/popon `native touch` options.
Remove dead code in wintouchemu that deals with these games.
Native touch is now at feature-parity with wintouchemu. Native touch
options work better with touch screens, while rawinput-based wintouchemu
has compat issues on some touchscreens. For these subscreen games
deprecate the usage of wintouchemu and make them use native touch stack
by default.
### For future consideration
Gitadora - not sure what to do with this one. We only use wintouchemu
for the single window case. For all other configurations, the game
accepts mouse and touch input without any hooks, so perhaps nothing
needs to be done here.
Nostalgia - consider moving away from wintouchemu and adopt native touch
hook here as well.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#635
## Description of change
Adds optional **button modifiers**, allowing a binding to require one or
more "modifier" buttons to be held before it activates.
- New "Modifiers" controller page in the overlay config to bind the
Modifier 1–4 source buttons.
- Each binding gains a 4-bit modifier_mask (Modifier 1-4). It is
persisted as an optional modifiers XML attribute on button nodes and
controller-preset entries. The attribute is optional and defaults to 0,
so existing config files and presets load unchanged and the feature is
off unless the user opts in.
- The button Edit properties popup gains a "Modifiers" dropdown to pick
which modifiers a binding requires. Doesn't apply to MIDI though.
- Input evaluation skips a binding whose required modifiers are not
held, falling through to its alternatives; velocity reporting uses the
same gated path.
- Controller-preset templates gain a "Modifiers" group for importing and
exporting.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Part 1 of many fixes for #814.
## Description of change
For the native touch hook - add code to inject synthetic touches using
Windows API (`InjectTouchInput`).
Note that this is Windows 8+ only, but we can make an assumption that we
are running on Win10+ for these games (TDJ/UFC/High Cheers) since the
cabs assume Win10.
Detect mouse events and allow IIDX poke to call into this to inject
synthetic touches.
Also, update the nativetouchhook to independently calculate window size
and rotation, instead of relying on rawinput layer.
## Testing
Tested to work with native touch option on IIDX, SDVX, POPN, all full
screen / windowed / sub on/off combinations.
Edge cases:
* sdvx main monitor rotated 270 deg
* touch invert option
* windowed mode resize / moved
All seem to work.
## Link to GitHub Issue or related Pull Request, if one exists
Regressed by #790
## Description of change
Avoid enumerating every display mode with `EnumDisplaySettings` during
the first raw touchscreen report, as it can take a couple hundred
milliseconds.
The latency-sensitive path now refreshes only the current display size
using `GetWindowRect(GetDesktopWindow())` and orientation using
`EnumDisplaySettingsEx(..., ENUM_CURRENT_SETTINGS, ..., EDS_RAWMODE)`.
Full `EnumDisplaySettings` enumeration runs only when native resolution
is needed for aspect compensation.
Jubeat and Reflec Beat now enable aspect compensation before
initializing touch input.
## Testing
Sanity checked rb/jb on laptops with non-16:9 ratio
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
In summary: for SDVX VM mode, this PR eliminates the need for `Note FPS
Target 120Hz` / `Game FPS Target 120Hz` patches typically used for AMD
GPU via synthetic responses provided via a fake NVAPI layer.
Before this change, playing on AMD GPU required patches to force the
game to render at 60Hz (See #107 for relevant discussion). Basically, if
NVAPI query fails, the game shows
`I:NvDisplayConfig: GetMainDisplayRefreshRate = 60.000hz (DUMMY)`
the game renders at 120Hz but the notes render at 60Hz, which would look
stuttery.
After this change, even without a real `nvapi64.dll`, spice will provide
a stub implementation, just enough to convince the game that the main
display is 120Hz, which causes notes to render at 120Hz as well.
This can be overridden by `-graphics-force-refresh` option.
Important note: if user has the `Note FPS Target 60Hz` patch but running
the game at 120Hz, before this change the notes would render at 60Hz,
but after this they will be at 120Hz. I don't know why anyone would
intentionally lower the notes framerate, so this is not going to be
fixed. If the user wants to run the game at 60Hz they can do so via
`-graphics-force-refresh`.
Another change - `-nonvapi` will always force down this synthetic nvapi
path, even if the system has the real `nvapi64.dll`. Even on NVDIA GPU
this option can be used to force this.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Similar to #797, draw an overlay to debug touch issues for reflec beat.
For rb, we draw on the ImGui surface. Draw horizontal and vertical line
for triggered sensors, and also a bounding box if scaling is in use.
Make small tweaks to how scaling works.
## Testing
Verified volzza 2 / reflesia / 1st game (landscape KBR)
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Debouce option for touch input. Applies to all touch handlers (rawinput,
win8, win7) since it sits at the touch layer, and then consumed by jb
touch logic.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
related to #697
## Description of change
Add a new option that paints touch targets and touch points for jubeat;
gets enabled if there is a touch screen connected. This is to help
explain / debug issues when users have their touch screen issues, which
is usually due to misalignment.
Fix the touch targets being off by 1 pixel (center gap is 1px wider in
both directions).
Also, simplify the `improved` algorithm to simulate a finger and trigger
nearest-neighbor for the AC dimensions. In terms of touch performance
this is near identical to what we had before, but it allows us to draw a
nice debug overlay instead of just grids.
## Testing
Tested portrait and landscape versions of jb.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Two changes:
1. Handle all HID events in `WM_INPUT` and not just the first one. This
only really affects 4000Hz / 8000Hz HID devices.
2. Go back to `3x3` as the default for rb IR touch emulation and remove
`1x1` as an option as it does not perform as well as I expected.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#697
## Description of change
Adds aspect-ratio compensation for raw input touch handler.
This addresses the problem with playing rawinput touch games - namely
jubeat and reflec beat - on a display that is not 16:9, and user chose
to preserve the aspect ratio. This happens a lot on:
* 16:10 touch screens
* touch screen laptops (which range from 3:2, 16:10, and so on).
Root cause is a **Windows Raw Input limitation**. Unlike
`WM_POINTER`/`WM_TOUCH`, where the OS already maps digitizer coordinates
to screen space (applying the display's calibration/scaling), Raw Input
delivers the HID digitizer's *raw* logical coordinates, spanning the
whole physical panel, with **no calibration or display-mapping data
attached**. We have to reconstruct that mapping ourselves.
When a game runs at a display mode whose aspect ratio differs from the
panel's native resolution, Windows scales the image with
letterboxing/pillarboxing (black bars). That is standard OS/GPU
behavior. Because Raw Input gives us no mapping to account for those
bars, touches land off-target. This change detects the mismatch and
remaps each touch from panel-space into the displayed image region;
touches inside the black bars are treated as released.
Adds new launcher option **`-rawtouchaspect`**.
Notes:
- Native resolution is the largest-area mode from `EnumDisplaySettings`
on the **primary** display, consistent with the existing primary-only
touch pipeline.
- Math assumes centered, aspect-preserving scaling; only one axis is
ever inset.
- A small epsilon (0.01) makes near-matched panels (e.g. 1366×768 vs
true 16:9) a no-op.
- If the user forces a stretched image, then the touches will be off
again. In this case, the user needs to use the `force off` setting.
## Testing
On my tiny Surface Go tablet,
* checked that jubeat squares align correctly
* good enough to full combo level 11 for reflec beat
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds an option to disable Live2D. Can be disabled everywhere, or just
during a song.
## Testing
Tested EG final and recent Nabla.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds an overlay window widget for controlling OBS over WebSocket.
Add new lines to the FPS widget that shows recording / streaming timers.
Show notifications for major state changes (stream started/stopped,
recording started/paused/resumed/stopped)
## Testing
I don't have a repro but a user reported that the cursor doesn't wrap
around on one side. Correctly account for windows bleeding over to other
monitors.
## Link to GitHub Issue or related Pull Request, if one exists
#251
## Description of change
CCJ registers for rawinput mouse. We allowed the rawinput registration
to go through to the OS, which prevents spice's rawinput stack from
using the mouse. This caused the overlay to not accept mouse input. Fix
it by not letting the rawinput registration through. Luckily, mouse
input continues to work properly in CCJ (for touch).
Also, fix a bug in DX11 overlay when toggling the main menu.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
For cab usage, when `-exec bm2dx.dll` is used without `-iidx` then
SOUND_OUTPUT_DEVICE never gets set.
Change this so that `SOUND_OUTPUT_DEVICE` gets set unconditionally if
`-iidxsounddevice` is set.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Create three distinct layers for the overlay:
1. Bottommost persistent layer - non-interactable layer that is always
on. This was only for notifications, but now the FPS widget lives here
as well.
2. Overlay windows layer - most interactable windows go here.
3. Topmost main menu - this is reserved for the main menu (escape key)
and this is a modal dialog that occludes the layers below.
Why?
- `toggle overlay` behavior with FPS widget *also* toggling on/off was a
bit confusing (now they're two separate keys)
- FPS widget is popular, but it caused the entire overlay to be active,
which affects how input is handled
- the main menu being a standalone window was a little awkward (now it's
a modal)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#730
## Description of change
Flip the option - enable the Realtek hack by default, unless the user
chooses not to.
## Testing
Tested ASIO path and WASAPI path. WASAPI path should be unaffected as
the game just picks the default audio device.
## Link to GitHub Issue or related Pull Request, if one exists
#730, #718
## Description of change
Part 1)
When ASIO is in use, the game also looks for a Realtek device so that it
can open a WASAPI Exclusive mode stream for headphones.
Add an option to fake that, in case the user doesn't have a Realtek
device.
Part 2)
`-gdaasio` wasn't workign properly - fix the logic.
## Testing
Seems to work with FlexASIO, and Xonar with no real Realtek device.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Create `WrappedAsio`, similar to how we wrap `IAudioEndpoint`
So far, the wrapper does these things:
1. logging (for diagnosis, since iidx and gfdm don't produce any logs
when asio succeeds)
2. iidx32+ hack to work around refcount mismatch issue
3. sdvx valk cab hack to force 2-channel audio ("downmixing" by taking
only the front channels)
4. honor volume boost
As a result of `#2` the mempatch was removed from `iidx.cpp` since we
can tackle it cleanly in the hook. `#3` also removes the need for manual
patches.
Real downmixing is hard & expensive on the CPU so it was not
implemented.
## Testing
Tested iidx/sdvx/gfdm with xonar and flexasio
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Refuse to load if `libaio.dll` exists but `<spec>` is set incorrectly
(almost certainly because the user copied old prop files from downlevel
version)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#154
## Description of change
Patch the game to skip over special holo printing logic and redirect to
the normal printer, resolving the soft lock + printer failure.
## Testing
Tested `NCG-2019012900`. Other versions might not work though since this
is patch-based not hook-based.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#717, fixes#647
## Description of change
Adds an option to downmix surround sound (5.1, 7.1, etc) down to stereo
(2 speakers). This can be used in most WASAPI games, including Gitadora
and FTT.
How it works: when the game tries to open surround format (say, 7.1) we
create a fake buffer and tell the game that it is supported. In reality
we open a 2-channel stream with the real sound card. When the stream
begins, we downmix the channels down to two (using one of many
algorithms) and output to the sound card.
While we're here, implement an option to boost the game volume by some
decibel value, which is a feature often requested by SDVX players. This
was needed since downmixing can sometimes result in quieter audio.
## Testing
Tested GW Delta and FTT.
Downmix doesn't work on IIDX (32 bits) but volume boost works.
## Link to GitHub Issue or related Pull Request, if one exists
#717
## Description of change
Add an option to override the ASIO device.
By default the game will try to use any ASIO driver that contains the
string `XONAR` in it.
## Testing
Tested with FlexASIO.
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Combine the two layout options into one
## Testing
- [x] windowed, x4
- [x] windowed, x2
- [x] windowed, x1 with sub
- [x] fs
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds toast notifications to the overlay.
Toast notifications are transient windows (shown for about 4 seconds).
These are drawn on top of the game even when the overlay is inactive
(i.e., when no window is open), and does not cause any input sink
behavior.
Add toasts for some common user-driven actions that could use a
notification, such as:
* screenshot
* card insert
* PIN macro
* API client connect/disconnect
* virtual printer
* screen resize toggle / scene switch
Add an option to change where the toasts are displayed, or to turn it
off entirely.
Add SDK function for it, and add it to the samples.
## Testing
Tested DDR (shown at bottom right, as is for most games) and RB (shown
top right by default).
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Add two options:
1. option to adjust poll rate
2. option to change emulation size
Also, the default configuration is changing from:
* ~1000Hz ish to 120Hz (default)
* 3x3 point to 1x1 point
In theory this does not make a meaningful change to how the game plays.
But if people want the old behavior they can change it.
## Testing
Tested on Volzza2 and Reflesia.
## Link to GitHub Issue or related Pull Request, if one exists
#477
## Description of change
By default the game needs 4 monitors.
With the new option to disable subscreens, you can now boot fullscreen
with a single 4K monitor, with subscreen overlay enabled. Side monitors
are not shown in the overlay; only the touch screen is emulated.
## Future work
- [ ] custom resolution (-forceres) doesn't work properly (hooking
ResetEx does allow the game to boot but will render incorrectly;
probably needs hex edits)
- [x] enable this automatically if the user has fewer than 4 monitors
- [ ] ability to boot with a 4k main screen + small subscreen (with no
side screens which do nothing gameplay wise), but this whole display
emulation is a nightmare to work with & test thoroughly so it'll have to
be in the future.
## Testing
Checklist:
- [x] fs on 1 monitor with option set
- [x] fs on 2 monitor with option set
- [x] windowed - default (4 windows, no overlay)
- [x] windowed - with option set (1 window, overlay)
- [x] fs with 4 monitors?
- [x] check popn hc for regression
## Link to GitHub Issue or related Pull Request, if one exists
Continuation of #682
## Description of change
RB uses SleepEx, so it was missed during the search while working on
#682.
## Testing
Plays about the same on a 200Hz touch monitor.
bicarus