## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Add `-icmphook` option under spicecfg Development/Network for emulating
keepalive ping replies in user mode, so games do not need to open
privileged raw ICMP sockets. This makes connecting to networks possible
on macOS under Whisky, and on Windows with ICMP firewalled or spice
running without Administrator privileges.
## Testing
Tested DDR and SDVX on Windows 10 and macOS Tahoe. Network check status
in test menu shows `CONNECTED` when -icmphook is enabled, and `NOT
CONNECTED` when it is disabled. Actual network functionality works as
expected (under previously impossible conditions).
## Link to GitHub Issue or related Pull Request, if one exists
Continuation of #682
## Description of change
RB uses SleepEx, so it was missed during the search while working on
#682.
## Testing
Plays about the same on a 200Hz touch monitor.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
When booting in fullscreen, hide the subscreen from the alt+tab list and
from the task bar. Alt-tabbing to it does nothing, so this is just to
avoid confusion.
No change to windowed mode.
## Testing
Tested TDJ/SDVX/Popn. Didn't test Gitadora but it's probably fine..
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Add a new option under `Monitor` group to change the monitor resolution
before booting the game, very similar to how orientation / refresh rate
options work.
This would be useful for games like Polaris Chord that boots at current
resolution but manages to have graphical issues when not in 1080p.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#562
## Description of change
### rawinput touch fixes
In rawinput touch handler, if the mouse events (`WM_LBUTTONDOWN`,
`WM_MOUSEMOVE`, `WM_LBUTTONUP`) originated from a touch screen, drop
them on the floor instead of treating them as touch events.
This is an attempt to fix phantom touch issues we see with some screens.
Fix another issue where, if mouse is clicked inside the window, and then
dragged outside the window and button is released, touch point (id 0)
continues to be held.
### wintouchemu fixes
If we detected a touch input recently (500ms), ignore new mouse clicks.
This isn't perfect, but hopefully it helps with filtering out mouse
clicks originating from touch screens.
Also, switch over to detecting the primary mouse button correctly, not
just the left mouse button.
### notes
Future investigation: are there really touchscreens that report a mouse
HID capability & insert mouse events? We could have a way to filter them
at rawinput level but it'll be ugly.
## Testing
Tried jubeat, beatstream..
## Description of change
There was enough feedback that the current algorithm is not ideal for
most touch screens because most touch screens are not 24". In the
current algorithm touching the gap is no-op, so people think the game is
dropping touches.
This PR introduces a new algorithm that inspect touches on the gap and
triggers the nearest square.
## Testing
Tested landscape and portrait jubeat.
## Link to GitHub Issue or related Pull Request, if one exists
continuation of #677
## Description of change
When overlay was hidden, when mouse buttons were clicked, they were
queued up and replayed when overlay became visible again.
This is due to improper usage of `GetAsyncKeyState`, per documentation.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#681
## Description of change
`Sleep` and `sleep_for()` can be very inaccurate and varies depending on
what the OS gives us...
### `timeBeginPeriod(1)`
On boot, we are now calling `timeBeginPeriod(1)`, which affects the
whole process but makes `Sleep` more accurate. There is some risk here
if any game was relying on doing things like `Sleep(1)` and expecting it
to run for 15.6ms. Most games already call `timeBeginPeriod(1)` in the
game engine, though not the whole time, so I'm hoping that this is not
too impactful.
### Opt out of Win11 power throttling
Ensure that timer resolution change above is respected even when the
window is occluded / minimized by opting out of throttling via
`PROCESS_POWER_THROTTLING_IGNORE_TIMER_RESOLUTION`.
### Use Win10 high resolution timer instead of Sleep
On Win10 1803 and above, there is a new OS-level API for high resolution
timers; if this is available, use it
(`CREATE_WAITABLE_TIMER_HIGH_RESOLUTION`). Worth noting that WINE
doesn't support this currently.
If not, fall back to `Sleep`, which is significantly better than
`sleep_for()` in my experiments.
Callers of Sleep / sleep_for were replaced with this new timer. Most of
them anyway; calls to Sleep() with more than 100ms+ was left alone.
### Add an option as a chicken bit
To opt out I'm adding a new option called `Use Legacy Timers` which will
revert to behavior before this PR. The code paths that switched from
`sleep_for` to `Sleep` will remain in place though, not affected by the
option.
## Expected changes
In some I/O emulation modules, poll threads may run more frequently,
resulting in lower latency.
It also means that spice overall may use more CPU resources and power.
If you don't like this, you can always enable the option to opt out;
e.g., if you're on old arcade cab PC.
## Testing
DDR p4io - ok
drs touch hook - ok
IIDX camera hook - ok
CCJ trackball - ok
## Link to GitHub Issue or related Pull Request, if one exists
#676#452
## Description of change
When spice SDK or API sets or clears button and analog override, we
don't tell MDXF about it, so it may fall behind. This is a special case
for DDR MDXF I/O emulation. For Naive/Xinput I think we are getting
lucky because they usually also generate WM_INPUT events.
Update the C++ SDK sample to provide more interesting example of
emulating DDR arrows with the keyboard.
## Testing
## Description of change
Seems to be an oversight when it was initially implemented; hooks should
not load when launching `spicecfg` (or `spice -cfg` or `spice64 -cfg`).
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds a flat-C, headers-only library for writing DLL plugins with spice.
This is meant to be an alternative to writing applications over spice
API which doesn't suit some scenarios like writing custom
high-performance I/O modules.
All you have to do is:
1. Create a 32-bit or 64-bit DLL with `spice_sdk_entry_point` as a
DLLExport
1. Include `spicesdk.h`, and optionally `spicesdk_io.h` (see
`extras\sdk\include`)
1. `spice_sdk_entry_point` will be called when hooks get initialized.
Call `init` with valid parameters.
1. When `init` returns, `SPICE_SDK_V0` will be filled out with a series
of function pointers; your DLL can now start calling into it.
1. Compile your DLL and add it as a DLL hook (`-k`) in spice when
launching the game.
See `v0_cpp.cpp` for an example.
V0 implements the following functions:
```
log;
get_game_info;
get_avs_info;
get_button;
set_button;
get_analog;
set_analog;
get_light;
set_light;
set_touch;
clear_touch;
insert_card;
set_keypad;
```
V0 is focused on providing common utility functions needed in a lot of
DLL hooks (get AVS info, log messages to file), and implementing I/O.
In the future, we could have more interesting things like:
* scanning and modifying memory
* installing DLL hooks
* having direct hooks into I/O emulation modules
* getting full tape LEDs
* having a callback into DX9 `Present` call
* drawing an ImGui window
More detailed documentation is coming soon in form of a wiki page.
## Testing
See included sample DLL.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#675
Yet another regression from #604
## Description of change
When overlay was hidden (not visible) it was still accepting keyboard
input, so when it became visible again the queued up keystrokes got
processed all at once.
Also, fix a bug with monitor settings update kicking in when in windowed
mode - this really should have been only for full screen.
## Testing
Tested DDR windowed / full screen, TDJ with subscreen overlay windowed /
fullscreen.
## Link to GitHub Issue or related Pull Request, if one exists
#181
## Description of change
Implement analog relative mode and delay option using a new
millisecond-based algorithm.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
Regression caused by #604, probably
## Description of change
When spicecfg or the game loses focus and regains it, scroll bar jumps
around. This was because we weren't keeping proper track of mouse wheel
position while not in focus, so when we gain it back, it's as if the
scroll bar was moved a huge distance.
## Testing
Tested spicecfg and in overlay.
## Link to GitHub Issue or related Pull Request, if one exists
#181
## Description of change
Use millisecond-based calculation to add artificial delay to the TT
input.
## Testing
Tested 64 bit TDJ and LDJ.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Add a checkbox to the buttons edit dialog that lets you set a device as
"always on", accomplished by setting the device to `Naive`, vkey to
`0xff` (invalid), and `Invert`.
No backend rawinput changes.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Re-implements fix for #181 as it was removed by #668
## Description of change
Add two options to add artificial delay to turntable input. These
operate directly on the input logic (`get_tt`) which is called by I/O
emulation code.
Functionally, it's **identical** to the `Delay (experimental)` option we
had in the analog tab, just moved to Options tab.
## Testing
64 bit tdj: ok
64 bit ldj bi2a: ok
32 bit ldj ezusb: ok
Worth noting that TDJ bi2x_hook polls at 120Hz, bi2a at ~500Hz, and
ezusb at ~170Hz
## Link to GitHub Issue or related Pull Request, if one exists
Related to #181
## Description of change
This PR removes two features marked as "experimental" for analog axis -
`Delay` and `Relative Axis`.
They have been in spice as experimental option for almost 2 years.. but
they have a fundamental problem of being tied to how often the analog is
polled. Not just how often the game's I/O emulation code polls it, but
literally any source (spice API, overlay, etc).
For `Delay`, the only real usage I'm aware of is for #181 which is
delaying IIDX turntable input. For this, I will follow up with a
separate PR that adds back the delay option specifically for IIDX.
For `Relative Axis` - I'm not quite sure if any one actually uses this.
This could be implemented per-game if some game demands it. Polaris
Chord already has one, for example.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Currently, all analogs are treated as circular values that wrap around.
This works for knobs and turntables, but can get weird for linear values
(like tilt sensors and sliders) especially once analog options are
enabled, such as sensitivity.
This PR groups analogs into 3 buckets: circular, linear (centered), and
linear (positive). Linear types get different algorithms applied to it
when options are set (e.g., sensitivity caps out at 0, 1 instead of
wrapping around).
In linear mode:
* Sensitivity value applies an exponential response curve (power curve)
to the original value.
* Multiplier/divisor serves as a linear cut-off.
* Relative mode works as you expect, but of course, values don't wrap
around.
* Invert and deadzone work as you expect (since they applied to the
controller input anyway)
* Smoothing is removed from the UI and has no effect.
* Delay is unaffected.
Also, fix a small bug with -/+ button not working for analog `Delay`
option.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#663
## Description of change
Apply monitor rotation and refresh rate again when fullscreen focus is
regained.
## Testing
Tested with sdvx7
## Link to GitHub Issue or related Pull Request, if one exists
#616
## Description of change
Fix UI labels being wrong for analog stick up/down (they were reversed).
Adjust deadzone so that when sticks are bound as digital buttons, they
are not as sensitive.
Small refactoring of code.
## Testing
Tested via spicecfg using my xbox one controller.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Some crappy DDR soft mats (either USB-based or console pads with crappy
adapters that lack a dedicated "DDR pad mode") use X and Y analog axis
for arrows, which means they cannot cleanly report Up+Down or Left+Right
input.
According to some ancient Stepmania code, a lot of these report a middle
value (value between center and right, for example, for left+right).
Borrow this hack from Stepmania and implement it in spice as analog
input for DDR.
Also, for rawinput/xinput automatic bind scenario, update the logic so
that face buttons are always detected before analog axis / dpads for
consistency. This would help with binding any DDR pads that
simultaneously input face buttons / dpad / analog axis, so that we can
prefer face buttons when detected.
## Testing
I don't have any soft mats that have this, but it was tested with an
xbox controller.
As noted in #567, a filesystem path that contains non-ascii will break a
lot if using a clang toolchain.
Luckily, fmtlib has a lossy utf8 convert when you use it to print a path
(after including `fmt/std.h`). The vast majority of this diff is just
removing `.string()` from paths inside loggings calls.
There are some callsites I _didn't_ touch, mainly the options, because
it would be an ABI break to change those to be wide strings and I cbf
looking into settings upgrades. There are also some spots (avs mountpath
remapping, for example) where the path is guaranteed to be ascii, so I
didn't modify them.
ImGui doesn't appear to easily support wide strings (I mean, surely it
does, but I'm not gonna look too far into it) so I mostly just left
those alone too, with a few spots modified to re-use fmtlib's lossy
utf8.
Some of the changes are basically never gonna be hit IRL, like who would
put a file with a non-ascii _extension_ along with their modules? But
the diff is (I hope) pretty easy to validate as OK.
Testing has been somewhat minimal, I fired up the GCC build of spice2x
in a dodgy folder name, got mojibake (running via wine in linux so take
that as you will), ran the unmodified clang spice and crashed the same
way the reporter did. After modification, I get the exact same mojibake
so I assume if the terminal enjoys utf8 it'll display OK.
Claude (only used for review) thinks the commit is fine but is annoyed
that I use `fmt::detail` in the appdata censoring, which is part of the
private API; personally I don't care because it's pretty stable.
## Link to GitHub Issue or related Pull Request, if one exists
regression caused by #653
## Description of change
Some controllers - like the Xbox One controller I have - reports
0xffffffff as the max range value for analog, despite reporting 16-bit
width. This causes us to consider 0xffffffff as -1 so the range became
[0, -1] which is invalid.
Our automatic calibration does eventually fix this (-1 will fix itself
to become the highest actual value reported, which would be 0xffff).
This seems to be a common issue with XInput-based controllers in
general: see `Correct_Axis_Max` in
https://github.com/argonlefou/DemulShooter/blob/master/DsCore/RawInput/RawInputController.cs#653 removed the fix that was masking this issue. Put in a new fix that
fixes these up.
## Testing
Tested with Xbox One controller.
## Link to GitHub Issue or related Pull Request, if one exists
#345
## Description of change
SDVX4 data from certain private forum has bad logger configuration and
crashes on boot. Add an explicit workaround to fix up that broken
`avs-config.xml` file, scoped to `soundvoltex.dll` + 32-bit.
## Testing
Tested HH.
## Link to GitHub Issue or related Pull Request, if one exists
Regression introduced by #595
## Description of change
`avs::core::file_exists` fails if you use `\` as path separator... what
I meant to use was `fileutils::file_exists`.
This would have caused failures - mostly for gitadora players - if they
used `prop\ea3-config2.xml` for example.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#653
## Description of change
By default, BAT Positive / Negative binds trigger when the stick is
tilted 10% off the center.
This needs a bit more customization since:
1. User may want to customize the center point (e.g., guitar controller
neutral position)
2. User may want to adjust the sensitivity (e.g., guitar controller tilt
angle to trigger wailing).
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Official GuitarFreaks controller has the motion sensor values with
`valuemin=-127` to `valuemax=127` and we don't deal with negative values
correctly.
## Testing
tbd
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
On some Win11 systems,
`CoCreateInstance(CLSID_DirectSoundI3DL2ReverbDMO)` started to fail with
`ERROR_MOD_NOT_FOUND` instead of `REGDB_E_CLASSNOTREG` for some reason.
## Testing
User tested.
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
Add rest of the LED strip lights.
## Testing
Tested U region.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#648
## Description of change
Deal with devices in hybrid packet mode that send garbage data in second
packet when it's out of bounds (outside the number of contact points).
MSDN says they're supposed to be (0, 0), but some devices don't follow
the spec.
## Testing
I don't have a device that reports garbage values but this should fix it
in theory.
I tested on my Dell touch monitor which is in hybrid mode & sends 5
touches at a time, but can split across two packets to send up to 10
touches. It sends (0, 0) for the remaining slots when there are 6-9
touch points, but confirmed that there was no regression.
## Description of change
This code adds a window title to FutureTomTom when running in windowed
mode and allows the windowed graphics hooks to take effect.
## Testing
I ran the game and made sure fullscreen mode still worked as well as all
window move/resize functionality.
## Description of change
`std::ostringstream.str()` returns a temporary string so it's invalid to
obtain c_str from it and pass it around.
## Testing
wip
## Link to GitHub Issue or related Pull Request, if one exists
#121
## Description of change
This implements a seperate ICCA card workflow for the slotted readers
acting how Resort Anthem expects, enabling cards to be inserted.
Additionally this fixes a bug where both card units would be treated the
same (for keypad reads) under Resort Anthem.
The slotted reader workflow was implemented as a seperate function for
two reasons - it would be nice to not mess with any existing code to
avoid breaking all the functional games, and the way the slotted readers
are handled by RA seemed different enough to how everything was already
designed to where it didn't make sense to keep adding special edge cases
for RA.
## Testing
IIDX18 was tested and cards could be inserted on both P1 and P2 side.
IIDX19 through 22 was tested to make sure nothing had broken for
wavepass emulation.
## Known Issues
In IIDX18, when a card isn't set but the insert key is pressed, after
the card timeout the game will error out with an invalid state error.
drmext